Causes of metal crusher vibrating screen trip

The main reasons for breaker vibrating screen trip include the following ‌ :

‌ power supply problem ‌ : unstable power supply voltage or aging, damage, leakage of the power cord will cause excessive current, which triggers the trip mechanism ‌.

‌ motor problem ‌ : motor failure, such as bearing damage, lack of oil, magnetic circuit performance decline, etc., will lead to excessive load, cause tripping ‌.

‌ load problem ‌ : if the crusher load is too large, the motor current will exceed the rated current, resulting in tripping ‌.

‌ equipment aging ‌ : air switches, current protectors and other equipment aging or capacity inconsistency can also lead to tripping ‌.

‌ Environmental factors ‌ : the production site environment is harsh, such as line damage, vibration, etc., will also cause tripping ‌.

‌ The method to solve the problem of metal crusher vibrating screen trip includes ‌ :



‌ Check the power voltage ‌. Install a voltage regulator or UPS to ensure that the power voltage is stable ‌.

‌ Check the motor and bearing ‌ : check the status of the motor and bearing regularly, replace the damaged parts in time, and ensure the normal operation of the motor ‌.

‌ reduce the load ‌ : appropriately reduce the input of materials, or replace the crusher with more power ‌.

‌ Maintain the line ‌ : ensure that the line is in good condition, avoid line damage and leakage ‌.

‌ Replace the aging equipment ‌ : replace the aging air switch and current protector to ensure that the capacity matches the load of the equipment ‌.

Through the above method, the problem of metal crusher vibrating screen tripping can be effectively solved to ensure the normal operation of the equipment.